Decription
The 40port TYPE–C Charger is a multi–functional fast charging device with a Type–C interface. It supports a variety of output fast charge protocols, including DCP/QC2.0/QC3.0/FCP/AFC/PD. It is compatible with a variety of mobile phones and laptops on the market.
The charger is powered by 8–30V solar panel or battery supply.
It has a power factor of more than 95% and a conversion rate of more than 85%, providing each port with an output power of 5–22.5W. Each port can automatically adjust the output current and voltage according to the recognized fast pulse protocol. The typical output voltage and current are: 5V 3.1A/7V 2.4A/9V 2A/12V 1.75A.
All TYPE–C ports on the 40port TYPE–C 1U charger can automatically adjust the over current point. Each port supports a maximum output of 12V/1.75A after successfully completing the high–voltage SCP quick–rush protocol handshake. When high–voltage SCP is output, the charging power is higher than that of PD.
Each port is independently integrated with various fast charge protocols, allowing for CC1/CC2 or DP/DM to automatically identify the fast charge protocols supported by the connected device and adjust the current and voltage accordingly. It also supports DCP (Apple, Samsung and BC1.2), Qualcomm QC2.0/QC3.0/ Huawei Fast Charge protocol FCP and high voltage SCP, Samsung Fast Charge protocol AFC, and USB PD2.0/ PD3.0 (PPS) output protocol.
The 40port TYPE–C charger also features a line supplement function which increases the output voltage when the output current increases, compensating for the voltage drop caused by the impedance of the connecting line.
Additionally, the 40port TYPE–C charger has a soft start function that prevents the impact current from affecting the stability of the output power supply.
The 40–port TYPE–C charger has multiple protection functions, including input over–voltage, input under–voltage, output over–current, output over–voltage, output under–voltage, and short–circuit protection. It also has a lamp function.
Specification
2 、 Features,
2-1. Multi-mouth design
◇:Multiple TYPE-C charging ports are designed to satisfy different charging interfaces of customers at the
same time
2-2Synchronous switch regulator
◇ : Built-in 12V 800W Stable voltage line
◇ : Input operating voltage range:DC8-30V
◇ : Output voltage range: 5V to 12V according to the fast charging protocol automatic adjustment
◇ : Type- C port PD output power: maximum20W(5V3. 1A/7V2.4A/9V2A/ 12V1.75A)
◇ output voltage wired supplement function: 50mV/A ◇ : Soft start function
2-3 :Support Type-C output interface and USB PD protocol
◇ : Support 5V/9V/12V voltage output
◇ Support PD2.0( PPS) output protocol
◇ PPS support 5-12V, 20mV/step voltage output: 2-4 :Output quick charging specifications
◇ : Supports Type -c PD2.0/ PPS port output
◇ : Support QC3.0/QC2.0
◇ :Support BC1.2/Apple/ Samsung agreement
◇ : Support Huawei fast stamping protocol FCP and high voltage SCP
◇: Support Samsung Quick C harge agreement AFC
2-5 :Four, multiple protection, high reliability
◇ : output over voltage protection, output under voltage protection, output short-circuit protection, output over current protection, output overload protection
◇ : Over temperature protection of the machine
◇ : DP/DM/CC over voltage protection
◇ : CC PIN withstand voltage 30V
◇ : ESD 4KV DC voltage withstand: 30V
6 、Five, the scope of use
- Charge Type-C electronic and digital products such as mobile phone, PDA, B luetooth headset 7 、Model description
TC-40 |
TYPE-C |
PD |
5V3A |
9V3A |
7V2.4A |
12v 1.75 |
|
TYPE-C |
QC |
5V3A |
9V3A |
7V2.4A |
12v 1.75 |
|
Note: QC in the table refers to the output power of high pressure quick charge
This QC quick charge output supports CV/CP/CC loop
8 、Physical display drawing : contac us to get it
9 、C harger Product dimension drawing
SIZE:280*125*30MM( No hanging ears)
10 、 Limit parameters
PARAMETERS |
SYMBOL |
VALUE |
UNITS |
Input Voltage |
∨IN |
8-10 |
V |
10-20 |
V |
Junction temperature range |
|
-40~150 |
C |
Storage temperature range |
Tstg |
-50~120 |
C |
human body model (HBM) |
ESD |
4 |
KV |
Stresses above the values listed in the absolute maximum rating section may cause permanent damage to the device, and excessive exposure at any absolute maximum condition may affect the reliability and service life of the device
11 、Recommended working conditions
PARAMETERS |
SYMBOL |
EMIN |
NORMAL |
MAX |
UNITS |
Input Voltage
(US) |
∨IN |
8 |
12 |
30 |
V |
Beyond these operating conditions, device performance is not guaranteed.
12 、Electrical characteristics
PARAMETERS |
SYMBOL |
Test condition |
EMIN |
NORMA L |
MAX |
UNITS |
I nput system |
Input Voltage |
∨IN |
DC |
8 |
12 |
30 |
V |
Functional switching system |
U pper tube
conduction
resistance |
RDS(ON) |
|
|
30 |
|
Ω |
Down pipe
conduction
resistance |
RDS(ON) |
|
|
20 |
|
Ω |
Medallion
frequency |
F5 |
|
|
100 |
|
KHZ |
Output system |
output voltage |
VOUT |
|
5 |
9 |
12 |
V |
Output voltage ripple |
ΔVOUT |
VOUT5V@3.A |
80 |
85 |
90 |
V |
VOUT7V@2.4.A |
85 |
90 |
95 |
V |
VOUT9V@2. 1.A |
90 |
95 |
100 |
V |
VOUT12V@ 1.75.A |
92 |
98 |
105 |
V |
Soft start time |
TSS |
VOUT5V |
|
4 |
|
ms |
Output belch restart voltage |
VOUT |
Output into CC mode,
output hiccup restart
voltage (VOUT set voltage is
greater than 5V) |
|
4.1 |
|
V |
Output into CC mode,
output hiccup restart
voltage (VOUT set voltage is
less than 5V) |
|
3 |
|
V |
Output hiccup interval |
THIC |
Output short circuit |
|
2 |
|
S |
DPDM Over
voltage protection
voltage |
VOVP- DPM D |
VOUT=5V |
|
4.5 |
|
V |
CC Over voltage protection voltage |
VOVP-CC |
|
6.0 |
|
V |
Thermal turn-off temperature |
TOTP |
Rise in temperature |
|
150 |
|
C |
Thermal turn-off
temperature
hysteresis |
ΔVOTP |
|
|
30 |
|
C |
13 、Appearance Function Description
14 、Typical Application Scenarios
It can be mounted on the wall using a retaining card. You can also use it on your desktop
15、Packaging information
40PORT TYPE-C CHARGER X 1 Power cable X 1 Hanging ear X 2